Motor Laminations Manufacturers, Motor Stamping Manufacturers Factory
Finish motor core stamping product photos that made by ING YU press:
Motor Core
Apex-125
- 4 points crank support & hydro-dynamic bushing
- 2-set frame of cast iron ensure verticality
- Separated clutch and brake
- Guiding system of slide & hydro-static bushings
- Siemens colorful automatic computer control system
EI Core
Apex-80
- 4 point crank support & hydro-dynamic bushing
- 2-set frame of cast iron ensure verticality
- Separated clutch and brake
- Guiding system of slide & hydro-static bushings
- Siemens colorful automatic computer control system
Compressor Motor Core
HD-350
- 6 points of crank supporting
- Separated clutch and brake
- Slide quick lift (Optional)
- Solution for tool jam without slide quick lift
- Guiding system of slide
- Siemens colorful automatic computer control system
EV Motor
HD-350W
- 8 hydro-dynamic bass bushings
- 2 bearing crank supporting
- Dynamic balanced counter weight
- Dual flywheel and brake system
- 4 plungers & gib guiding system
- Siemens colorful automatic computer control system
Taiwan High Speed Motor Manufacturers
Summarized Spec
| MODEL | Apex-30 | Apex-45 | Apex-60 | Apex-80 | Apex-125 | |
|---|---|---|---|---|---|---|
| Tonnage | ton | 30 | 45 | 60 | 80 | 125 |
| Stroke | mm | 40 | 40 | 50 | 50 | 50 |
| Press Speed | spm | 200-800 | 200-700 | 200-500 | 200-500 | 200-500 |
| Main Motor | hp | 15 | 15 | 20 | 30 | 30 |
| Bolster size | mm | 600 x 450 | 800 x 550 | 1000 x 650 | 1200 x 750 | 1400 x 850 |
Summarized Spec
| Model | HD-220 | HD-350 | HD-350W 3000 | HD-350W 3700 | HD-450 | |
|---|---|---|---|---|---|---|
| Capacity | tons | 220 | 350 | 350 | 350 | 450 |
| Stroke | mm | 30 | 30 | 30 | 30 | 30 |
| Press Speed | spm | 200-500 | 150-400 | 150-350 | 150-350 | 100-300 |
| Main Motor | hp | 50 | 60 | 40 x 2 | 50 x 2 | 75 |
| Bolster size | mm | 1700 x 650 | 2300 x 750 | 3000 x 1200 | 3700 x 1200 | 2600 x 1200 |
Progressive Tooling / Die
We are able to produce per customer's requirement
Feature:
- High accuracy
- On time delivery
- Unmatched die life
- Prompt spares supplies
- Trials at Taiwan
Accessory:
| Dual Head Uncoiler | |||
|---|---|---|---|
| Type | DCT-12 | DCT-30 | DCT-40 |
| Max outside dia (mm) | 800 | 1200 | 1200 |
| Valid inside dia (mm) | 450-520 | 450-520 | 450-520 |
| Max load per head (kg) | 800 | 1000 | 1500 |
| Hydraulic expand | yes | yes | yes |
| Straightener with S Loop | |||
|---|---|---|---|
| Type | FRS-12 | FRS-30 | FRS-40 |
| Max width (mm) | 120 | 300 | 400 |
| Valid thickness (mm) | 0.3-1.0 | 0.4-1.2 | 0.4-1.2 |
| Max Speed (m/min) | 60 | 60 | 90 |
| Drive motor (hp) | 2 | 3 | 5 |
Gear Change Roll Feeder:
- Thickness range: 0.3 – 2.3mm
- Width: 120mm / 300mm / 400mm
- Feed speed: 60m/min
- Pitch range: 4–120mm / 120-360mm
Control and Detection System(Optional):
Siemens PLC Control:
- 100 set tooling memory
- Miss-feed circuit x 4 / strip-end circuit x 1
- Batch/cam reserved output x 5
BDC Detection/Protection:
- 4 channel
Load Detection:
- 4 channel
