Mechanical Press
Frame of Cast Iron and Excellent Design of Structure
1 set of massive frame resist deflection and reduce vibration. Reciprocating accuracy of bottom-dead center is kept within 0.002mm.
Dynamically Balanced Device
Dynamically balancer reserves weight of upper die to eliminate the inertia produced by reciprocation.
4 Points of Crank Supporting
2 bearings and 2 copper bushings are both applied to resist wear throughout years.
Eccentric Shaft
Less deflection and more power output are the advantage.
Aluminum Alloy Air Clutch
Aluminum alloy air clutch has the advantage of high torque and low inertia.
High Rigid & Low Inertia Slide
Enhance strength, but light weight and lower inertia.
Hydraulic Locking Device Of Screw Rod
Hydraulic locking device of screw rod eliminates the clearance to keep reciprocating accuracy.
Hydraulic Press Plates
Plunger & Dual-Guide-Post
Static pressure design is applied at plunger & guide posts. Because of high pressure supporting and none wear, keep verticality throughout years.
Gap Enclosure
Gap enclosure design can decrease gap open during stamping to increase die service life.
Circulating Device Of Lubrication
All components are lubricated to prevent from wear by pump of high pressure.
Type | Civic-25 | Civic-35 | Civic-45 | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity | tons | 25 | 35 | 45 | |||||||||
Slide stroke | mm | 20 | 25 | 30 | 40 | 20 | 25 | 30 | 40 | 20 | 25 | 30 | 40 |
Press Speed | spm | 200 | 1200 |
200 | 1100 |
200 | 1000 |
200 | 800 |
200 | 1200 |
200 | 1100 |
200 | 1000 |
200 | 800 |
200 | 1000 |
200 | 900 |
200 | 800 |
200 | 700 |
Shut Height | mm | 210 | 205 | 205 | 200 | 265 | 260 | 260 | 255 | 265 | 260 | 260 | 255 |
Area of Bolster | mm | 500×300 | 600×380 | 700×450 | |||||||||
Thickness of Bloster | mm | 80 | 100 | 120 | |||||||||
Area of Slide | mm | 300 x 200 | 350 x 250 | 400 x 300 | |||||||||
Slide Adjustment | mm | 40 | 40 | 40 | |||||||||
Main Motor | hp | 10 | 15 | 20 |
Type | Civic-25 | Civic-35 | Civic-45 | |
---|---|---|---|---|
Height of Press (A) | mm | 2085 | 2310 | 2510 |
Height for Operation (B) | mm | 800 | 850 | 950 |
Height for Scrap out (C) | mm | 120 | 120 | 120 |
Width of Press (D) | mm | 900 | 1000 | 1080 |
Width with Feeder (E) | mm | 1228 | 1328 | 1413 |
Depth of Press (F) | mm | 1100 | 1250 | 1535 |
Weight of Press | tons | 3 | 4 | 6 |
* We reserve the right to modify all data contained in this catalogue without notice. Please contact with us for detail specification & dimension of the press.