Crank Type

Apex Series

Straight-Side Two-Plunger High-Speed Precision Press

Inquire Now

Stroke Adjustable

8 different stroke lengths can be changed easily through SIEMENS control system.
The shut height and press speed will adjust synchronously through SIEMENS control system.


Quick Lifting

The quick access device enables the slide up 70mm in 30 seconds to help users quickly solve tooling problems.

4 Point Crank Support & Hydro-Dynamic Bushing

Apex 30~60, bearings are applied both at supporting & connection.The clearance is smaller and B.D.C is more accurate. Apex 80~220, Hydro-dynamic bushings can stand with thrust and decrease friction area. It can suppress heat expansion to prevent the wear throughout years.

2-Set Frame of Cast Iron Ensure Verticality

The guiding holes are cast at bed and machined at the same time.

Guiding System of Slide & Hydro-Static Bushings

Dual plungers bear up more upward eccentric load during stainless steel stamping. Hydro-static bushings can stand with higher thrust, decrease friction area, and suppress heat expansion to prevent the wear of bearing throughout years.

Normal Clutch

Separated Clutch & Brake

The torch of separated clutch & brake is bigger, so braking time and angle get less. Balanced load at two side can reduces wear of bearings. If mechanical parts fail at clutch or brake, precision stamping press stops immediately.

Siemens Colorful Automatic Computer Control System

Colorful TFT-LCD screen is applied to operate simply by variety color of screen and letters display.

Impressart Stamps

Machine Specification
Type Apex-30 Apex-45 Apex-60 Apex-80 Apex-125
Capacity tons 30 45 60 80 125
Slide stroke mm 10 20 30 40 10 20 30 40 20 30 40 50 20 30 40 50 20 30 40 50
Press Speed spm 200
|
1400
200
|
1200
200
|
1000
200
|
800
200
|
1300
200
|
1100
200
|
900
200
|
700
200
|
1000
200
|
800
200
|
600
200
|
500
200
|
800
200
|
700
200
|
600
200
|
500
200
|
800
200
|
700
200
|
600
200
|
500
Shut Height mm 255 250 245 240 285 280 275 270 325 320 315 310 365 360 355 350 385 380 375 370
Area of bolster mm 600 x 450 800 x 550 1000 x 650 1200 x 750 1400 x 850
Bolster thickness mm 100 120 140 140 160
Area of slide mm 600 x 320 800 x 400 1000 x 450 1200 x 500 1400 x 600
Shut Height adjustment mm 40 50 50 50 50
Main motor hp 15 15 20 30 30
Dimension of Press
Type Apex-30 Apex-45 Apex-60 Apex-80 Apex-125
Height of Press (A) mm 2270 2400 2700 3160 3430
Height for Operation (B) mm 850 850 900 1000 1060
Height for Scrap out (C) mm 331 311 300 292 282
Width of Press (D) mm 1100 1200 1500 1930 2200
Width with Feeder (E) mm 1870 2000 2250 2578 2843
Depth of Press (F) mm 950 1250 1400 1600 1800
Height of feed line (G) mm 115 ± 25 125 ± 25 150 ± 25 170 ± 25 180 ± 25
Width of Upright opening (H) mm 220 260 350 350 400
Net Weight tons 5 8 12 17 25

* We reserve the right to modify all data contained in this catalogue without notice. Please contact with us for detail specification & dimension of the press.


High Speed Feeder Gripper Type Gear Chang Type
Type FGP-806 FDG-12 FDG-25 FDG-40
Max. Width (mm) 80 120 250 400
Max. thickness (mm) 2.0 2.3 2.3 2.3
Max. Pitch (mm) 0-60 4-120 12-360 4-120 12-360 4-120 12-360
Max. speed (m/min) 40 60 60 60

Dual Head Uncoiler
Type DCT-12 DCT-25 DCT-40
Max. outside dia (mm) 800 1200 1200
Valid inside dia (mm) 450-520 450-520 450-520
Max. load per head (kg) 800 1000 1500
Hydraulic expand yes yes yes

Straightener with S Loop
Type FRS-12 FRS-25 FRS-40
Max. width (mm) 120 250 400
Valid thickness (mm) 0.3-1.0 0.4-1.2 0.4-1.2
Max. speed (m/min) 60 60 90
Drive motor (hp) 2 3 5
Standard Accessories
  • Slide adjust motor (0.01 mm)
  • Front-rear safety door
  • Joint for air gun x 1
  • Mis-feed joint x 4
  • Batch, Cam joint x 5
  • Inverter
  • Slide quick lift (not available for knuckle)
  • Siemens coutrol system with load monitior
  • Anti-vibration air type cushion (Apex 30-60)
  • Anti-vibration spring type cushion (Apex80-220)
  • Die arm (Apex60-220)
  • Die lifter (Apex80-220)
Optional Accessories
  • Knuckle-Link Structure
  • Straightener (Lamination)
  • Gripper Feed
  • Dual Head Uncoiler (Lamination)
  • Gear Change Roll Feed